SC Wuling battery (req. ver.1.2 progress) (compact)

Produces 6 SC Wuling batteries/min (optimal efficiency) NOTE: This blueprint utilises 30unit(s)/min Sandleaf powder output, which may or may not be available depending on your current Xiranite production setup. If you do not have this or do not know, you will need to build an additional planter-shredder setup to supply this blueprint How to use: 1. Place the blueprint 2. Place Sandleaf in the planter 3. Connect top conduit outlet (as shown in image) with 0.5 unit(s)/s of Sewage (output of 1 Cuprium refinery) 4. Connect bottom-right conduit outlet (as shown in image) with 1 unit(s)/s of Clean water (output of 1 fluid pump) 5. Connect bottom-left conduit inlet (as shown in image) with EITHER a purification unit (suggested) OR replace the inlet with two water treatment units 6. You're all set Advantage(s) - No wasted components - Compact. All of the blueprint is confined within the width of the depot unloaders it uses, so it can easily slot into existing builds - The Inert Xircon effluent (shipped by the conduit inlet) can be used to create additional Xicron effluent via purification units Disadvantage(s) - Setup can be a pain - Asks for excess Sandleaf powder, which is not always available - Requires expanded crucible unlock, at which point most people would already have existing SC Wuling battery lines. This is a bit of an annoying blueprint built mostly to satisfy my own desire to improve on previous battery line designs. It trades compactness with complexity and is probably not beginner friendly. Although setup can be a little easier if you also use my other blueprints, which are all designed to work together.