Extremely Compact 60/m Xircon + 30/m Xircon Effluent (Expanded Reactor only)

**IMPORTANT**: You MUST prime the center cuprium refinery (the one being fed water via the purifier) with at least 2u clean water to get the flow going. Separate the fluid from water bottles in your inventory, otherwise the left-side reactors will bog. The top 2 pipe bridges require 1u/s clean water **each** (not 1u/s for both, either 1 pump each or 2 pumps w/ converger + splitter). 0.5u/s clean water will suffice for the right-side cuprium refinery (1 pump, optionally split). See the 2nd screenshot for a fully working example setup. This factory complex makes use of the purifier's ability to purify inert xircon effluent into xircon effluent and water at a factor of 4 to 1 and also the expanded reactor's ability to perform 3 reactions at once. Feel free to reroute the reactors' water pipes to wherever is more convenient for you. This setup is prone to clogging if your depot runs dry on xiranite/ferrium ore or you're not supplying enough water to the reactors. This is because the production of xircon proper also produces sewage as a byproduct, which it won't do if sewage in the reactor is clogged at 50. Even if you eventually fix your xiranite/ferrium ore/water balancing, you have to drain the sewage from each of the reactors manually for this complex to work normally again. Have some fluid tanks on hand and be ready to do some plumbing in case this happens. If you want something less space and power efficient but requires less maintenance, I have another blueprint that offloads the xircon formula to its own reactor https://talospioneers.com/en/blueprints/01kpp76ahc10490htnd4hzry6x Update: Cleaned up the piping a bit more, reduced pylons and protostashes, deleted the old blueprint