Xircon Battery 6/m + Cuprium Parts 30/m

Nvm I was wrong I just never found the cave

@Lam_Cake Trueee, very good call. I'm assuming the root issue was with 2 of these BPs running, there isn't enough orignium in Wuling currently to keep up, and it would clog the Xircon. But idk could be wrong.

@Lam_Cake Thx for the reply, I didn't even think about going directly to the conduit =D I managed to fix the issue by emptying the reactor and the conduit B, and it didn't happen again (emptying only the reactor didn't work). I'll probably follow your solution to make sure it never happens again :)

@CocunutsRGood and @MystCloud - I think I figured it out. It looks like this blueprint has the sewage coming into this first reactor crucible and then just passing it through to the conduit B. This would be fine, except if the reactor gets backed up and stops producing Liquid Xiranite, it will then switch to the other viable formula of Liquid Xiranite + Sewage = Inert and Regular Xircon Effluent. The solution is to simply route the sewage from the refining unit around the reactor and directly into the conduit B

Same issue than @CocunutsRGood here, can't figure out why this is happening :(

I'm running into a different issue not related to the cuprium parts clogging. My reactor crucible closest to the depot unloader, eventually will create inert and regular xircon effluent. Haven't figured out what the cause is though but it happens consistently after a while, usually overnight. Anyone else run into this too?

@Gramcracker I can confirm it was the cuprium parts. The storage was full, so the rifinery got clogged and didnt produce any sewage. I was a bit confused at first, since I thought I'm using up all of the cuprium parts for Cuprium components. Turned out I had a single Cuprium Part line in my sub PAC, which created a small overflow. Everything is working fine now. Thank you!

@Rpytai, I forgot to mention the actual solution, oops, you need a resource sink for the cuprium parts that are being manufactured. Whether thats in the form of @SkylakeFrost's Syringe A/Jincao Tea which utilizes 12/m cuprium parts that would be produced by 2 of these circon battery blueprints OR you can manually sell the Cuprium parts in the stock exchange

Hey @ryptai, I had the same issue. I think the issue is that the refinery (1) for the cuprium is getting clogged and so the sewage pipe that goes into the reactor crucible (2) is not passing any sewage to it and stopping all the rest of the systems. This is my best guess, I will let you know tomorrow if I'm get that stoppage. For reference, refinery (1) is just to the right of the top water inlet in the picture reactor crucible (2) is the one connected to the top right purple B water outlet Im not sure about your production line issues though thats weird

Hello there, first of all awesome work! I came here from your full 1.1 base layout because I have a problem with the battery production. The production works at 100% efficiency when I place everything down and connect all of the pipes. However after some time passes (Usually over night) the production suddenly collapses. Something is clogging up the production but I just cant figure out what exactly the problem is. The weirdest thing is that I placed two of these production lines like in your 1.1 base and both of these production lines work at different speeds. One at around 75%, one at around 25%. Everything is connected in exactly the same way. Are you also experiencing this and/or do you have a solution for this problem? I already checked all of your posts (and comments) but didnt see anyone else having this problem.

@user_T1QssE08aUI3ftup check my profile, it has all my blueprints, included Xiranite production.

Good blueprint just wish you added "Xiranite" production to it. Now I have to go find another blueprint for only "Xiranite"