Compact Hetonite Part (6u/m) (OLD)
390
5
0
Requires 1u/s acid on top right reactor (1 pump) and 2u/s acid on bottom right reactor (2 pumps). This consumes a whopping 240u/m of cuprium. Right now we're limited to 180u/m of cuprium ore with the current nodes available, but if you intend to use all of your cuprium for hetonite part production then this will do it. EDIT (7/21): You should be using the gas recipe for hetonite part production instead, as it's far more compact and efficient. https://talospioneers.com/en/blueprints/01ky3qyex9gatm4cknym83kh7e
Commentaires (2)
Connectez-vous pour rejoindre la conversation.
@Faye
22 juil. 2026
It was a clerical error, I was looking at the hetonite instead of the hetonite part but yes. Thanks for that
@Odis
15 mai 2026
30u/min is false, thats impossible with this setup. The fitting unit for hetonite part takes 10 seconds per part, so maximum is 6u/min. I have it at full efficiency, exactly like your images, and the theoretical yield and current yield is 6/min. Other parts, like Amethyst and Cuprium parts take 2 seconds in the fitting unit, so that might be where your misunderstanding came from