My All-In-One Wuling AICs 1.1 (see description + 26/03 update)

@NightFox happy to hear that! So, 1) yes, it's normal since there are extra units destined to the production of Xiranite Components. 2) Yes, you can have active both at the same time, but keep in mind that the other production lines will slow down so I suggest to alternate daily depending on your needs. 3) Basically there will be too much Sewage to deal with. Slowing the distribution of Xiranite will clog at some point the Reactor Crucibles that produces Xircon for the batteries with Sewage, that will also clog the Refining Units producing Cuprium and all this will inevitably slow the production of syringes. In conclusion, Sewage is a nightmare. Hope to have been clear enough and thanks for using the blueprints!

Amazing blueprint!! I'm still getting used to the item control ports, but for now it seems to be working as intended. I do have a few questions tho: 1) Is it normal that the originium ore usage is sometimes higher than the yield? 2) is it recommended to have just 1 of the 2 gearing units working at once and/or is it fine to have them both active at the same time? 3) I'm just really curious, I understand how the Component lines slow down the battery production (since both require Xiranite), but how come they also slow down Yazhen Syringe production?

@_francliin_ Thanks for the advice! Explains what I've been seeing when having CP+ ON even chokes out battery production altogether and all power goes dark after a few hours. Will keep it OFF then until Xiranite Components at a healthy abundance. Yeah sacrifice some battery production cause of gear artificing. Like to have both components since not every "good match" gear is in the Cuprium Component lot, more are actually Xiranite Component I think lol. Then again could just make due with "standard match" and not think about it too much since resources to make basically infinite and is a guaranteed upgrade system. Have to wonder how this system will evolve over time and balance out if they keep releasing new gear templates, already feels at its limit haha. Gotcha so intentional bottle clogging. I see it now cause of the Xiranite Components with its dual Xiranite feeding. If that gearing unit is OFF then allows Xiranite to be solely used for battery production hence 1 to 1 trade with Liquid Xiranite. Sure is a headache! Yes you did thank you! The clogging and slow downs I saw I thought could be addressed but just now realizing I only made it worst, don't fix what isn't broken lol...

@nEEtdo0d glad it helps! To give you some clearence, CP+ should be ON only when you're producing Cuprium Components so you can still have Yazhen Syringe [A] at max speed and the batteries with a minimum reduction, if you're producing both Xiranite and Cuprium Components turn OFF CP+ bacause the lack of sufficient sewage will inevitably slow the production of Yazhen Syringe [A] and the batteries. About the Gearing Units, if you want to secure a "large" amount of components I suggest to feed them with the additional Xiranite belt for both units anyway, so they can yield 3/min (half of the expected speed as you said too and there's no way to increase it for now). About the bottles clogging, yes, it's intentional when producing Xiranite Components, but there's no clogging issue if you only produce Cuprium Components with CP+ ON. This sewage system is kinda a headache to deal with and I hope I can optimize it better in the next patch, as for the current version it should be enough to use. I hope to have replied to all your doubts and you if have more to ask, well, ask!

Blueprint is great, thanks for your hard work! Worked pretty good with the oscillation to maximize battery sales But when I turn on the CP+, not seeing the bump increase in production. It actually starts clogging because the sewage it produces disappears, so the sewage the original 2 CP aren't producing enough since they take turns in feeding a part since there is now a constant flow of parts added to the mix whereas the 2 were already producing at a constant rate. Keeping it off since sewage at least disperses equally to the crucicles since having the 3rd line I think takes away the balance. I have both gearing machines running with both their xiranite belts active (they are going at half speed but to be expected since they are sharing with battery production). Should I actually only allow 1 xiranite belt to be feeding into it? Are the bottle cuprium production supposed to be clogging intentionally slowing them down ore usage? Saw bottles were being produced slowly because of more sewage clogging and because seeing max sewage across all machines in the line, figured putting a water treatment would help and it did but then that starts really eating the ores and afraid I'll run out if I keep it connected. Believe its the sewage thats clogging since not making enough liquid xiranite due to half speed belts between components and batteries Any help would be appreciated! Thank you!

@user_st71xVrm6fM0Ene7 I see, you can indeed optimize it by customizing your own "WLDIGE" blueprint using this website "https://dige.aunly.cn/?lang=en", but if you don't know how to utilize it I can show you a picture on Discord. Since your power usage exceed 3935w I suggest you to not use the blueprint at all for now, instead just let run the factory normally with the 2 Thermal Banks.

@_francliin_ the battery thing confuses me a bit, I did add a few things so my consumption is around 4250W, but will If i just Keep a Terminal Always full does that help? Or is there a better way to optimize it?

user_st71xVrm6fM0Ene7 I appreciate it bro, thanks for using this guide o7

You sir/ma'am are the GOAT, Steps easy to follow, Now i've got everything automated, Thank you so much for saving me from Breaking my headphones :).

@R3f13x hi again, I tried to help you with all I could on Discord since you showed me your problem, this is the least I can do, repeadeatly telling you to connect the pipes between the Fluid Pumps and the Outlet Inlets, and then power the pumps. Also, you're the first saying that all these blueprints don't work and honestly that's your skill issue, there's nothing difficult to connect some pipes to get water, this is literally the basic of Wuling, I don't think it's that complicated. In the end you didn't connect them nor powered them, decided to torn down the factory saying it's not worth it, skill issues bro. Anyway, I wish you a nice day and thanks for commenting even out of frustration.

I created an account just to tell you that because of you I lost the whole factory, actually this all in blueprint doesn't work, I connected the outlet conduit with the inlet and I don't get any water.. Thanks for nothing..

@UParadox so, the 3935w number comes from D.I.G.E. (https://dige.aunly.cn/?lang=en) and it's based on my number of Ziplines and turrets distributed among Jingyu Valley, Wuling City and Qingbo Stockade. Basically, by using the least amount possible of Ziplines and turrets (the latter can be turned OFF when not farming, quite reducing the power usage) you can optimize the power consuption. Also, WLDIGE is made to minimize the use of batteries, rather than how much power it consumes, it's to save batteries. I just added now some more tips for the use of this blueprint in the guide, and if it's still not enough you can make your own DIGE blueprint from the website tool and adjust accordingly the space dedicated in the factory by moving a bit both middle Transport Belts for Sandleaf Powder. And lastly, thanks for pointing out the Xiranite Pylon issue! Updated that too in the Google doc.

@_francliin_ 2 things, 1 question and then one issue Question: Where are you getting the 3935w number? Is it just a calcuation on how much power can be used when using the WLDIGE Blueprint without running out of power? Issue: It looks like on the DOP 2 BP, the Xiranite Pylon at the bottom left is 1 block too low to fit the WLDIGE BP in currently. I had to move it up one space and then the WLDIGE BP fit in. https://ibb.co/TMq32L4r

@Ryo Kurusu you need to follow the Efficiency Adjustments steps before placing CP+.

with all the blueprints I'm unable to place the cp+ one

@TekSupport omg thanks for pointing out, I didn't realize it at all, now it's fixed. And yes, the production of components are inactive by default, but when placing for the first time they will function until they clog.

In the Sub-AIC blueprint, the far left Yazhen looks to be missing a return loop. Also, is the use of the item control port at current settings for the option of producing components if desired, but set in such a way that it is technically inactive by default?

Thanks yall for the sweet comments! And replying to some of those: @user_IyHG7gDkIPMzsolk check more carefully your AIC area I guess? Sometimes I miss pieces of transport belts here and there to remove. @udingereget sadly I don't have any code for Asia, I don't have friends on the Asia Server nor I have a secondary account dedicated. @Leviathanbro yes, technically it could work anyway, but I don't know what you have unlocked and whatnot, if you didn't unlock the new Cuprium Ore sites yet then 90% of the Factory won't work, and if you didn't fully unlock the other mineral beds too then also expect shortage of materials and a general slow down/shut down.

Goated big thanks

Would it work if I don't have every single resource unlocked? I'm kinda... Poor in exploration and all

UPDATE: the blueprint does work. Don’t forget to upgrade your AIC after the 1.1 update. I would delete my last comment but there’s no such option available to me

This doesn’t work. The second blueprint “Battery 1” has a Depot Bus Port on the bottom left. But the first Blueprint “DOP 1” already has a Depot Bus Port! So you can’t place the second blueprint at all!!!

Thank you for giving me hope i was allready giving up on a outpost building. Your blueprint is amazing and instructions are easy to follow. Just made account to say this. 😁

You are the greatest in the world. I've been waiting for your blueprints, thank you so much

I made an account just to tell you that you're amazing. Easily the most impressive blueprint set I've seen so far.